Do you have an iPhone with a Lightning port? If so, you may be wondering if it’s dirty. Apple has a guide on how to clean your iPhone’s lightning port, but it’s important to do it properly in order to avoid any problems down the road. If you’re not sure how to clean your iPhone’s lightning port, here are some tips:
- Use a soft cloth or paper towel to dry the port. This will help remove any built-up dirt and dust that may have collected on the port over time.
- Use a vacuum cleaner with the hose attachment to clean the port completely. Be careful not to damage the phone or its circuitry!
- Use a hairdryer on high heat for about 10 minutes to dry the port completely. This will also remove any excess moisture that may have built up on the port over time.
Why You Should Do This
Even if you keep your iPhone in a case, the Lightning port is probably exposed much of the time. Keeping your phone in a pocket or bag will expose the port to lint and other debris. Plugging in your device to charge pushes anything in the port deeper, so it won’t necessarily fall out on its own.
Over time, repeating this process can cause a lot of unwanted stuff to build up in your charging port. As the contacts used to charge your iPhone are covered, you might find that your device has problems charging. You might need to wiggle the cable to get things working, or it may stop charging altogether.
If you take your iPhone to an Apple store and complain that it’s not charging properly, one of the first things the technicians will try is cleaning out your charging port. You should save yourself the bother and periodically clean out the port ahead of time before problems occur.
How to Clean Your iPhone’s Charging Port
We’ve seen Apple’s technicians go to town on a Lightning port first-hand, but you should be careful since there’s a risk you could damage the contacts. Causing damage may result in an iPhone that won’t charge properly again, and a repair could be expensive.
It’s best to avoid metal objects that could cause damage in favor of a wooden toothpick. The key here is to not use too much pressure that you risk breaking the toothpick, which could potentially cause it to become stuck. You want to avoid bending the contacts, ideally avoiding them altogether.
Grab a light source and peer into the port before you start to get an idea of how dirty it is. Take your wooden toothpick and insert it, then run it along the walls of the port. Avoid touching the anchors on the side that keep your cable in place. Remove the toothpick and take off anything that comes out, then repeat. Keep going until the port looks clean and nothing else is coming out.
Apple doesn’t recommend using compressed (canned) air to clean the iPhone. You should also avoid using a cotton swab or anything that may introduce more lint or fiber into the port. Save your cotton swabs for dipping into isopropyl alcohol when you want to fully disinfect the exterior of your iPhone.
iPhone Still Not Charging?
Test your iPhone by plugging in a Lightning cable. If your iPhone still isn’t charging properly, consider replacing the Lightning cable or power adapter. Test the cable and power adapter with a different device to ensure that they aren’t to blame.
If you’re still having trouble, it’s probably time to book your iPhone in for a repair. If your device is still under warranty or covered by AppleCare+ (which you can check in your iPhone’s settings), make an appointment with Apple to have the device serviced.
If your device is out of warranty you may still want to stick with Apple for peace of mind, but be aware that you have other options when it comes to repairing your iPhone including third parties who will offer a cheaper service. Most repair shops (including Apple) will give you an accurate quote so you can decide whether or not it’s worth repairing your device or buying a new iPhone.
