There are a lot of different whole home audio systems on the market, and it can be hard to decide which one is right for you. Here’s a guide to help you make the best decision. First, consider what you want from your audio system. Do you want to listen to your music all in one place, or do you want to scattered around different rooms? Do you want a system that can handle multiple speakers or just one? Next, decide what type of audio system you want. There are two main types of whole home audio systems: satellite and cable. Satellite systems allow you to watch TV and listen to music from various devices in your house at the same time, while cable systems let you watch TV and listen to music from various devices in your house as well as access other channels like HBO and Showtime. Finally, decide how much money you’re willing to spend. If you’re only interested in listening to music, then a satellite system might be the best option for you. If however, you also want to watch TV and/or access other channels, then a cable system might be better for you.
Two Types of Whole Home Audio Setups
If you’re not familiar, whole home audio (also known as multi-room audio or whole house audio) refers to speakers placed in multiple locations in your home. Instead of treating them as separate systems, you control them all from one place, and music plays through all of them simultaneously.
There are two main ways of setting up a whole home audio system. The older, more traditional route uses loudspeakers and speaker wire, usually running through your walls. These systems have traditionally never been wildly popular outside of enthusiast circles.
Wired Whole Home Audio: The Pros and Cons
One of the most popular reasons that people opt for wired whole home audio systems is the ability to customize. You can carefully choose each component, place them exactly where you want, and craft every element in the system exactly how you want it. This is why this method still appeals to audio enthusiasts.
These are typically standard audio and home theater components, meaning you can mix and match as much as you feel like. If you want to use one brand of speakers and another brand for your amplifier, nothing is going to stop you.
Using standard, off-the-shelf stereo components also helps keep things cheap. Speakers and speaker wires are much cheaper than buying wireless speakers with integrated amplifiers and other components built-in. This is relative, and you can still spend a lot of money, but you can certainly save money if you try.
While you may end up saving money with a wired whole home audio system, there is a trade-off: time. All that customizability means you’ll need to make sure that all your components work well together, like matching impedances between your amplifier and speakers.
You may think that the wiring aspect hard isn’t, especially if you’ve wired your home theater system before. That knowledge does translate, but there is more to consider, like running wires through walls. If you’re a new homeowner or in the middle of remodeling, this may be easy, but otherwise wiring will be the toughest part of the setup.
It’s not always just a single amp, speakers, and wires either. Depending on the size of your setup and how many rooms you’re wiring, you may need additional amplifiers and other equipment.
Wireless Whole Home Audio: The Pros and Cons
The wireless variety of whole home audio is likely the one most people think of these days when they hear the term. Modern wireless multi-room speaker systems made whole home audio easy to set up. Just plug in your speakers, connect them to Wi-Fi, and start listening.
Wireless whole home audio systems are also typically easier to use. Rather than a physical remote control for a wired system, most wireless multi-room systems let you control every aspect of them with either your voice or your phone. This makes adjusting volumes or only playing in certain rooms much easier.
No wires means no installation. Running speaker wire is the hardest part of setting up a wired whole home audio system, and the only cables you have to worry about with a wireless system are the power cables you plug into the wall.
One final pro with wireless systems is that you can potentially get a best of both worlds scenario. You’ll find product lines like Yamaha MultiCast, which have the convenience of wireless whole home audio with more traditional home theater systems and other speaker options.
Of course, this ease of use doesn’t come cheap. Wireless whole home audio systems can get expensive fast, and the price only goes up with each additional room. Setting up a simple two-room with Sonos One speakers will run you nearly $600, for example.
The other big downside with wireless whole home audio systems is that many brands don’t work with other brands. For example, you’re not going to have an easy time getting speakers from Apple and Google to work well together.
Which Is the Right Option for You?
If you’re looking for the easiest option, then wireless wins by a mile. A wireless multi-room system is easy to set up, easy to use, and you can start with two or three speakers and add more as you want. Just make sure to remember that the price can start rising pretty quickly.
On the other hand, if you opt to have someone install a wired whole home audio system for you, you’re going to be spending a lot as well. The wired option is best if you absolutely must have the custom layout of your dreams. This is also perfect for you if the journey is the destination, and you think you’ll enjoy the build process.
No matter which way you choose, you’ll likely be thrilled with the results.
RELATED: What You Need to Know About Speaker Wiring Cables
